All Services

PCB Design

From schematic capture to manufacturing-ready layouts for power electronics and embedded systems.

My PCB design experience spans from microcontroller-based motherboards to high-power motor controllers. Starting with schematic capture and ending with manufacturing support, I ensure designs are not only functional but manufacturable and reliable. My background in supplier quality engineering at Lockheed Martin gives me unique insight into what makes a board succeed—or fail—in production.

Capabilities

✓ Schematic capture and design review
✓ Multi-layer PCB layout
✓ High-current power electronics design
✓ Mixed-signal layout (analog/digital isolation)
✓ EMC/EMI considerations and shielding
✓ Thermal management and copper pours
✓ Design for Manufacturing (DFM) review
✓ Bill of Materials (BOM) optimization
✓ Supplier quality assessment
✓ Manufacturing defect troubleshooting
✓ IPC-A-610 workmanship standards
✓ Component selection and sourcing

Tools & Technologies

⚡ Autodesk Fusion Electronics 🔧 Altium Designer 🦅 EAGLE 📐 PADS 📟 KiCad 📊 LTspice

Featured Projects

spooresLEAK

Battery-powered Wi-Fi leak sensor with I2C humidity, temperature, barometric pressure, and air quality sensors.

spooresVALVE

Wi-Fi valve controller for remote water shutoff and automation.

VFD-Midi

Motor controller board for variable frequency drive applications targeting 150 kW applications.

Inverter Test Station Control Box

Test interface with GPIO switches, torque control knobs, CAN/serial interfaces, encoder simulator banana plugs, and e-stop safety.

Spoores Test Fixture

Production programming fixture with pogo pins for fast, reliable board flashing.

Automated Test Fixture Board

Production test board with GPIO, DAC, ADC, and other interfaces for automated board validation.

Nvidia Jetson Carrier Board

Custom carrier board with matched impedance traces for high-speed signal integrity.

SwampSat CubeSat

Motherboard design for the University of Florida's first CubeSat satellite mission.

Quality Background

Three years at Lockheed Martin troubleshooting manufacturing defects in circuit boards and electrical components, visiting suppliers to improve production processes. This experience informs every design decision I make.

IPC-A-610 - Acceptability of Electronic Assemblies

Lockheed Martin • Issued Aug 2011

Prototyping & Assembly

I build what I design. From initial prototypes to small production runs, I have the tools and skills to bring boards to life.

Through-hole & SMD soldering Hot air rework Digital microscope inspection Custom prototype cables Heatshrink & strain relief ESD-safe workstation

Let's build The Next Big Thing together! 🚀

Whether you need embedded software, PCB design, or a full product development partner, I'm here to help.

Let's Go! Explore Services